| EM 300 G3 rack-mount receiver |
|
| RF frequency range |
925 - 932 MHz |
| Transmission/receiving frequencies |
1,680 |
| Presets |
max 24 |
| Switching bandwidth |
42 MHz |
| Peak deviation |
+/- 48 kHz |
| Compander |
HDX |
| Frequency response (microphone) |
25.....18000 Hz |
| Signal-to-noise ratio |
> 115 dB(A) |
| THD, total harmonic distortion |
< 0,9 % |
| In compliance with |
ETS 300422 , ETS 300445 , CE , FCC |
| Antenna connector |
2 BNC, 50 Ohm |
| Audio-XLR connector |
XLR / 6,3 mm jack |
| Audio output level (balanced) |
XLR: +18 dBu max |
| Audio output level (unbalanced) |
Jack: +12 dBu max |
| Dimensions (Receiver) |
212 x 202 x 43 mm |
| Weight (Receiver) |
980 g |
|
|
| SK 300 G3 bodypack transmitter |
|
| RF frequency range |
925 - 932 MHz |
| Transmission/receiving frequencies |
1680 (max. 20 Presets) |
| Switching bandwidth |
42 MHz |
| Peak deviation |
+/- 48 kHz |
| Compander |
HDX |
| Frequency response (microphone) |
80.....18000 Hz |
| Signal-to-noise ratio |
> 115 dB(A) |
| THD, total harmonic distortion |
< 0,9 % |
| In compliance with |
ETS 300422 , ETS 300445 , CE , FCC |
| Audio-XLR connector |
3,5 mm jack |
| RF output power |
10 mW |
| Operating time (transmitter) |
> 8 h |
| Input voltage range |
1,8 V line |
| Input voltage range |
max. 3,0 Veff line |
| Dimensions (Transmitter) |
82 x 64 x 24 mm |
| Weight (Transmitter) |
~ 160 g |
|
|
|
|
| Delivery Includes |
|
| 1 EM 300 G3 rack-mount receiver |
|
| 1 SK 300 G3 bodypack transmitter |
|
| 1 ME 2 clip-on microphone (omni-directional) |
|
| 1 GA 3 rack mount |
|
| 1 NT 2 power supply unit |
|
| 2 antennas |
|
| 2 AA batteries |
|
| Operating instructions |
현재위치 : 
