즐겨찾기추가
on on on on on on on on on on on on on on on on
현재위치 : Home > 이퀄라이져

ALESIS (3)   ASHLY (7)   BEHRINGER (6)   BSS (5)   DBX (18)   KLARK TEKNIK (5)   LA AUDIO (2)   SAMSON (2)   TC ELECTRONIC (2)   YAMAHA (1)   ATAKA (2)   기타 (3)   TOS AUDIO (1)   BBE (1)   SOUNDART (6)   PHONIC (2)  


   
SQUARE ONE(SQ1G)
    · 고객선호도 :
    · 시중가격 :
    · 판매가격 :
    · 포 인 트 :
    · 수 량 :

                    (0)                     (0)                     (0)

[제품정보]

45mm faders with integral dust guards

Long-throw faders for maximum accuracy and resolution.

Signal present & Clip LEDs

Maximum input capability of +22dBu.

Universal Power Supply

Auto voltage-sensing, operates anywhere between 100-240V +/- 10%.

Fully balanced inputs & Outputs

XLR & TRS connectors, both feature extremely high CMRR.

Relay activated bypass

Continues to pass audio in the event of power failure.

Roadworthy 3U steel chassis

Designed to withstand the rigours of the road.

PROportional Q filters

The 'Q' or bandwidth of the Square ONE's filters is proportional to the gain applied, and so gives increasing focus on real problem frequencies. This also means that adjacent filters sum together with minimum phase error, providing smooth, ripple-free summation.
This filter mapping is also implemented on the World-leading KLARK TEKNIK DN370, and is the most appropriate for live sound reinforcement.

High Pass Filters

The HPF on graphic equalisers are used to remove unwanted subsonic frequencies (traditionally about 30Hz). The HPF on the Square ONE graphic is set at 80Hz. If using your Square ONE graphic with a large speaker system, then you will almost certainly be using an active crossover, which should provide appropriate subsonic protection. In this case, leave the HPF out of circuit.
When using more compact loudspeakers, use the 80Hz. knee of the Square ONE HPF for maximising their headroom and efficiency (If using your Square ONE graphic with foldback loudspeakers which have an extended bass response, the HPF can still be used, in fact, useful results can be obtained by 'bending' the knee of the HPF, by boosting the 63Hz fader on the graphic).

Low Pass Filters

The Square ONE graphic's LPF is fixed at 12kHz. This is optimal for stage monitoring applications, both loudspeaker and IEM systems, and will increase available headroom as well as providing HF drivers with some thermal protection against ultrasonic frequencies.
When engaged simultaneously, the Square ONE graphic's HPF & LPF give optimal control of the operating bandwidth of most foldback (floor wedge & IEM) transducer systems.
번호 제목 작성자 작성일 평가점수
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다.
 
* 이 상품을 사용해 보셨다면 사용후기를 써 주십시오.
번호 제목 작성자 작성일 답변
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오.
 
* 이 상품에 대한 궁금한 사항이 있으신 분은 질문해 주십시오.
배송 내용을 입력하십시오.
교환/반품 내용을 입력하십시오.
이 상품과 관련된 상품이 없습니다.