[제품설명]
The 878HL is a dual impedance, omnidirectional dynamic microphone offering modern
styling and features in a rugged Cycolac housing for all industrial and commercial public
address and paging applications. A slight rise above 200Hz gives the 878HL a natural and
highly intelligible sound. The 878HL offers a long life DPDT leaf switch with three types of
switch activation; a momentary push bar, a locking on/off switch and lift-to-talk operation.
The 878HL is manufactured to take abuse and retain its performance and appearance over
a long life. Four molded, non-skid, non-marring, permanently resilient shock isolation "feet"
are located under the base. The high or low impedance selector switch is located on the
bottom of the microphone. The 878HL is supplied with 7 ft of four conductor, two shielded,
cable wired normally open for relay control. If a line-shorting switch function is desired, the
878HL can be easily rewired in the field.
Specifications
- Operating Principle: Moving coil dynamic
- Polar Pattern: Omnidirectional
- Frequency Response: 80Hz-12kHz
- Sensitivity HiZ: -43 dBV (7.2 mV) @ 1 Pa
- Sensitivity LoZ: -56 dBV (1.0 mV) @ 1 Pa
- Impedance HiZ: 40k ohms
- Impedance LoZ: 400 ohms