제품소개
여섯 개의 버튼과 한 개의 로터리식 컨트롤러를 가진 리모트 컨트롤러로서 각 버튼들의 기능은 사운드웹 디자이
너를 이용해서 사용자가 원하는 대로 프로그램 할 수 있고 언제든지 수정이 가능한 제품입니다.
사용하기 쉬운 메뉴 구조를 가지고 있으며, 텍스트를 자유롭게 입력할 수 있는 장점을 가지고 있습니다.
외부 마이크 입력과 자체 마이크와 두 개의 라인 출력을 제공하고 있으며, 9011 Power Adapter 9010 리모트 컨
트롤러를 9088이나 9000에 연결할때 전원공급용 인터페이스로 사용됩니다.
1) 6개의 S/W와 1개의 로터리 S/W로 구성된 Remote control panel.
2) 24DC power supply 가 필요.
SW9010의 Power/Network adapter box.
Stanalone universal AC input 24 volt DC Power Supply.
5 way switch and rotary fader.
5 way switch and rotary fader(USA style).
Description
The 9010 remote control panel connects to the Soundweb network via the usual category five cable -
although direct cable termination is used in place of the RJ-45 connectors. The unit provides a graphic
LCD display, six programmable soft keys, a programmable parameter wheel, and two inputs for paging
microphones. It fits into a three-gang wall box.
With a vast number of Soundweb systems now installed worldwide, BSS Audio has released the new
9010 Remote Controller which brings sophisticated operational possibilities to any installation but
removes the need for any local technical expertise to use it. Consultants, installers and users will
immediately see the
operational simplicity that the 9010 can bring to a facility.
The 9010, or ‘Jellyfish’ as it has become affectionately known at BSS, uses 6 programmable buttons, an
LCD screen and a rotary encoder to provide access to and control of virtually any function and
parameter in Soundweb’s DSP configurations. These include volume controls, eq settings, routing,
paging, and recalling different system presets.
Also included on the 9010 are an internal capsule microphone, which can be used for paging, an
external microphone input, and two audio line outputs (which could be used for signal monitoring).
Programming the 9010 takes place in the Soundweb Designer software, using a very simple drag-and-
drop interface that requires absolutely no scripting or coding at all. Nested menus, complete with
password protection if required, can be created and the whole interface can be tested in an emulation
mode
The 9010 connects into Soundweb’s proprietary network system which is used to route both control
data and 8 channels of 48kHz digital audio around an installation.
Specifications
9010 Programmable Remote
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
>88dB (22Hz to 22kHz unweighted)
|
|
|
|
|
|
|
|
|
|
현재위치 : 
