INPUT
Type: Active balanced
Impedance: 20k Ohms balanced, 10k Ohms unbalanced
Max Level: +23dBu

OUTPUT
Type: Servo-balanced
Min Load: 200 Ohms balanced, 100 Ohms unbalanced
Max Level: +23dBu

I/O CONNECTORS
XLR, 1/4"TRS, Eurobock

FREQUENCY RESPONSE
+/-.25dB 2-Hz-20kHz

IM DISTORTION (SMPTE)
<.01% @+20dBu

TOTAL HARMONIC DISTORTION
<.01% @+20dBu, 20Hz-20kHz

OUTPUT NOISE
<-92dBu unweighted

CROSSTALK
<-90dB MQX2150 (20Hz-20kHz)

FILTERS
MQX2150
Type: Constant Q Wein-Bridge
Number: 2x15
Bandwidth: 2/3 Octave
Tolerance: +/-3%
Range: +/-15dB
Subsonic: 18dB/Octave @20Hz (internally switchable)

MQX2310
Type: Constant Q Wein-Bridge
Number: 2x31
Bandwidth: 1/3 Octave
Tolerance: +/-3%
Range: +/-15dB
Subsonic: 18dB/Octave @40Hz

POWER REQUIREMENTS
100-240VAC, 50-60Hz,  24W

SHIPPING WEIGHT
MQX2150: 14lb.
MQX2310: 16lb.

DIMENSIONS
MQX2150: 19"W x 1.75"H x 8"D
MQX2310: 19"W x 3.5"H x 8"D

 

 

 

 

MQX Series Graphic Equalizer는 GQX Series와 같은 성능과 디자인의 제품을 Compact 사이즈로 만들어 장비의 이동

을 보다 용이하게 만든 제품이다.

• 모노 31밴드 그래픽 이퀄라이저

MQX-1310 The graphic equalizer shall be monaural (1 channel). It shall consist of 31 bands centered on

standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual

 bands shall be activated by linear slide faders with a 25mm travel , and a tactile center detent. The range of

 equalization per band shall be either ±6dB or ±15dB selected via a 2-position switch.

The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of

 +23dBu. Frequency response shall be ±.25dB 20Hz to 20kHz. Hum and noise shall be at least -92dBu and

 SMPTE intermodulation distortion or THD shall be less than .01% at full output. Input impedance shall be 20k

ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm balanced, 100 ohm unbalanced.

Inputs and outputs shall be active (tranformerless) balanced type on both XLR, 1/4. phone jacks and barrier strip

 terminals. Individual filters shall be Wein-bridge type and connected in a summing circuit optimized for minimum

 filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully

 symmetrical, with the filter being electrically removed from the circuit in the center (flat) position.

Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjust-able to

 insure long term accuracy. The equalizer shall also include an 18dB per octave high pass filter at 40Hz,

 equipped with a bypass switch. Green signal presence and red clip indicators shall show critical operating

 levels. Input gain shall be adjustable over -infinity to +6dB, and an overall EQ bypass switch shall be included.

 The equalizer shall weigh 6.5 lbs net and mount in a standard 19. rack using 1 space (1.75. high). The power

 requirement shall be 90- 125VAC, 50-60Hz, 10W. The unit shall be an Ashly Audio MQX-1310.